Product is made to order
Ideal as a secure outside garden store or extra security as an inside workshop store or storeroom shed, the Asgard Classic full metal storage unit has double doors that (unlike many wooden sheds or plastic sheds) can be positioned on either the left or right hand side of the front of the unit. This gives you maximum flexibility in areas where space is tight.
Increasingly popular as a store for horse riding equipment the Asgard classic is a flexible secure storage unit for even the smallest of areas.
As with many of our Asgard secure storage products, The Classic standard features include; a pick resistant Euro lock, a metal floor and a Galvanised polyester coated finish all backed by Asgards ten year warranty.
The Classic is supplied with tool-hanging rails, and the necessary fixing supports to attach standard equestrian saddle racks which can be supplied if required.
Please see the Asgard Accessories section. If the Classic is a little big for your needs, try the Compact.
Fittings are also supplied to enable the unit to be bolted to the ground, so it cannot be carried away or knocked over.
The Asgard Classic secure metal shed is certified by the Loss Prevention Certification Board to LPS 1175 Security Rating 1.
| Dimensions |
| |
|
|
| Height |
: |
1904mm (75") (front) |
|
| Height |
: |
1798mm (71") (back) |
| Width |
: |
1872mm (74") |
| Depth |
: |
808mm (32") |
| Weight |
: |
160kg |
| |
|
|
| Please note that before installation can take place a level, firm surface will be required. You may already have this available (e.g. concrete, tarmac, patio), but if not lay concrete or slabs (50mm/2” thick) before installation. The base must be solid, completely flat and secure. Minimum base dimensions required - 2020mm x 960mm. |
Asgard Warranty:-
Our products are low maintenance and have sufficient ventilation to avoid condensation forming.
A 10-year anti-perforation warranty caused by rust is offered with all products.
Asgard units are low maintenance and should give you years of trouble free service.
A little TLC will help keep your Asgard in good condition
Units should be washed down regularly (at least twice a year) with soapy water.
Hinges should be lubricated with suitable oil to ensure continued ease of use.
Any paint damage (as a result of the unit being knocked, dented or scratched) should be touched up with exterior touch-up paint immediately, as some rusting may occur if left untreated.
Should rusting occur we recommend that the following steps are followed:
- affected area should be gently rubbed down to base metal with a medium grade sandpaper
- treat area with any rust inhibitor product
- Apply touch-up paint and leave to dry
Failure to comply with these essential maintenance instructions will invalidate the 10-year anti-perforation warranty.
|
